It is not clear whether Utah street laws allow the installation of auxiliary lights in addition to headlights and taillights. Type I and Type II ATVs can be classified as road approval and used on designated public roads. For more information on the requirements, visit the Utah Highway Patrol website. The Utah Code (UC) governs the street laws of the state. A non-resident operator authorized on highways in another state may only use a legal ATV on the road in Utah if that state reciprocates a legal ATV on the road in Utah on highways in the other state. The non-resident operator, who is in reciprocal law with Utah, must have the necessary Utah equipment before they can operate as a legal ATV on the road. Non-transparent tint or material added to the windows immediately to the left or right of the driver`s seat is illegal if it allows light transmission of less than 43%. (Left/right front window). The right side mirror must not be missing when a window is tinted.
The tint of the windows behind the driver can be as dark as desired. Must be based on the lighting colors specified in the chat in the “PLT Safety Inspection Manual”. If a vehicle`s track gauge has been changed, Utah requires that the fenders and strainers be extended to cover the entire width of the tires. The discussion in `348/355` began with Extreme, on January 14, 2013. Only Davis, Salt Lake and Weber counties currently require emissions testing in Utah. Get to know the requirements – OHV-Street-Legal-Code-5.8.18.pdf. It is illegal to attach buoyancy implours to the front suspension of a vehicle driven in Utah. All suspension lift blocks attached to the rear of a vehicle shall consist of a single piece. It`s unclear whether or not Utah has rules for replacing or changing engine power. Each PHEV (ATV, UTV, motorcycle or snowmobile) must have an up-to-date OHV registration sticker. Most non-resident PHEV drivers are required to obtain a non-resident ORV licence for every ATV, UTV, OHM and snowmobile they bring into the state. These permits are available from suppliers near popular OHV destinations and online.
A complete list of suppliers is available from the Utah State Office of Parks and Recreation. Learn more about OHV registration in Utah Silencers are required in Utah. Exhaust cuts are prohibited. Bumpers are mandatory in Utah. All bumpers must be at least 4.5 inches in size. All tires in the vehicle must be safe and without exposed bulges or cords. Utah requires a minimum tread depth of 1/16 inch. Tire alignment is not included in the code.
Utah requires vehicles to have brakes capable of stopping the vehicle at a speed of 20 mph within a 40-foot radius. A secondary mechanical parking brake is also required. Utah has a vehicle frame height limitation law based on the vehicle`s GVWR. In addition, the lowest part of the vehicle floor must not be more than 3 inches above the top of the frame. Utah laws do not specify whether windshields are required or not. However, vehicles equipped with windscreens must be equipped with windscreen wipers. All vehicles driven in Utah are limited to a maximum width of 102 inches, a maximum height of 14 feet and a single vehicle length limit of 45 feet. Rear tires must have the top 50% of the tire covered with mud flaps, fenders or body construction. The rear strainers must be aligned directly with the tyre and at least as wide as the tyre. Further detailed information can be found in the “PLT Safety Inspection Manual”.
